Eaton CEAG Ex-Control Units and Control Stations
Applications:
Control stations are used as a remote means of:
- Motor control
- Visual indication of equipment performance
- On-off control of circuits
- Circuit selection
Common applications include:
-
Areas which are hazardous due to the presence of flammable vapors, gases or highly combustible dusts
-
Areas which are hazardous due to the presence of flammable vapors, gases or highly combustible dusts
-
For installation at petroleum refineries, chemical and petrochemical plants and other process industry facilities where similar hazards exist
Certifications and compliances
- UL/cUL Listed
- Class I, Division 2, Groups A, B, C, D
- Class II, Division 1, Groups E, F, G (cUL)
- Class I, Zones 1 and 2, Ex de IIB + H2, T6
- AEx de IIB + H2, T6
- Type 3, 4, 4X; IP66
- CENELEC-PTB 00 ATEX 3117
- Ex de IIC, T6, Zones 1 and 2, IP66
CEAG Ex-Control Units and Control Stations
CEAG explosion-protected control units and control stations are available in enclosures made of thermoplastic, glass-fibre reinforced polyester, light alloy or stainless steel. The large variety of enclosure materials is already an indication of the numerous customized configuration possibilities, which are supplemented by a large selection of built-in components.
Easy connection of cables thanks to the snap-on fixing method for control units. A further advantage is the low-cut enclosure walls, which allow easier access.
This are the ex-protected control units and control stations Eaton offers:
The link “2.4.xx.EN.pdf” shows the relevant pages about CEAG explosion-protected control units and control stations of the latest product catalogue.
The link “product details” shows a lot of other information, like national and international certificates.
Ex-Installation Switch
Installation switch with luminous label. For use both indoors and outdoors. Can entry from top or bottom.
Ex-Control Stations
Control units in moulded plastic and light alloy versions. Enclosures can be combined and equipped individually.
Components for individual Ex-Control Stations
Components to build into individual designed control stations series Ghg 41 ... - GHG 48..
Ex-Control and Signal Units for Panel Mounting
Built-in elements for switch panel mounting up to a wall thickness of 5 mm. All components with slip-on strain relief and protective cap
Ex-Control-Switches
Control switches with up to 6 contacts and 2 up to 5 switch positions. 6 mm² cable clamping range allows the connection of multi-wire conductors
Flameproof Light Alloy Control Stations
Aluminium-silicum die-cast control switch protected against aggressive environments. Optional padlocking facility.
Interested with this product
Design features
- NEMA 4X, IP66 enclosure with formed-in-place gasket
- Available with all operators: indicator lights, potentiometers, control switches, pushbuttons, terminal blocks and meters
- Base-mounted contact blocks
- Easy change-out components snap in place on DIN rail
- Enclosure meets UL 94-VO; also available in anti-static Ex e materials Inserts for mounting DIN rails
- Available with a maximum of 2 entries - top and bottom for conduit fittings or cable glands
- Suitable for universal mounting plates on pipes, conduit, wall or channels
- Mounting dimensions data molded on back
- Captive, corrosion-resistant cover screws
- Built-in mounting slots for wall installation
